Spiral strip type / weightless / conical mixer

Screw mixer(powder blender) structure as shown by the drive mechanism, the "u" Simplified Lo stirring institutions, cover, bracket, and a feed mechanism and other components.

Driven screw stirring institutions motor through reducer rotating, on the one hand so that the material generated to move up and down, on the other hand due to the characteristic advantages of the spiral strip material to produce internal and external convection to achieve the purpose of well-mixed, it has three standard mixing design a continuous Lo, interrupted spiral strip and blades, according to the requirements of the center or bottom material to choose.Mixing machines, mixers, blendersHorizontal mixing machine seriesThe barrel can be tilted 100 degrees, easy unloading. The chain safety device to protect the safety of the operator and equipment.(2) the timer can be selected between 0-30 minutes mixing time. Barrel and blades made of stainless steel, easy to clean, to avoid corrosion.Vertical mixing machineA four-tower designs, small size, easy to move.(2) is equipped with the cycloid pin wheel reducer motor, low noise, durable.(3) complete mixing within a short time, low energy consumption, high efficiency.Lid, end of a barrel press molding, with accurate, more durable.5 Ye timer can be selected between 0 to 30 minutes mixing time.Barrel Color Mixer Series(powder blender)
A barrel of imported stainless steel manufacturing, welding firm, bright surface, easy to clean.2, 360 degrees rotation, feeding, discharging any positioning, easy to operate.3, the first mesh protective cover, reasonable structure, beautiful and practical, to ensure safe operation.4, the timer can be selected between 0-30 minutes mixing time.Double cone rotary vacuum drying mixerThe double cone rotary vacuum dryer set mixed - dry in one dryer. Condensers, vacuum pumps and dryer facilities, to form a vacuum drying device. The advanced design of the machine (such as the need for solvent recovery condenser may or may not), the internal structure is simple, easy to clean material to discharge all and easy to operate, reduce labor intensity and improve the working environment. Same time due to the container itself, rotation of materials also turn the wall of the plot is not material, and therefore a higher heat transfer coefficient, drying rate, and not only save energy, and materials can be dried evenly full, good quality. Can be widely used in pharmaceutical, chemical, food, dyes and other materials dry. With "GMP" requirements.SZG series double cone rotary vacuum dryer to a double cone rotating tank, pass into the tank in a vacuum jacket, steam or hot water heating, heat through the tank wall and the wet material, contact. Damp raw material absorbed after evaporation of water vapor, is pumped through the vacuum pump vacuum exhaust pipe. The tank body in a vacuum, and the rotating of tank material continuously from top to bottom, inside and outside turning, it accelerated the drying rate of the material, improve the drying efficiency, to achieve uniform drying purposes. This machine is used in pharmaceutical, chemical, food, chemical industry, powder, granular materials, vacuum drying and mixing. Particularly suitable for the material of the following requirements: can not withstand the high temperature of the heat-sensitive materials; easily oxidized, hazardous materials; to be recovered in the solvent and toxic gases; the residual volatile matter content very end of the material; requirements fully mixed(powder blender), uniform materials .

powder blender for industrial.
This contents  for reference only, business please go to the official network http://mill.com.tw

Spiral strip type / weightless / conical mixer

Special putty powder blender

Description

Special blender offer, putty powder putty powder blender, putty powder mixer price, putty powder mixer offer,  specializing in the production of putty powder mixer, putty powder mixer, putty powder mixer, powder blender, vertical mixer , vertical crushing mixer, crushing mixing combination9FH series of feed mixerFirst, the characteristics of:Feed mixer series the vertical 250,500,1000,2000 type applies to feed specialized processing operators and large, medium and small farms, feed processing. Advanced aircraft design, reasonable structure, reliable performance, easy maintenance, high efficiency, small footprint, saving time-saving, less dust, good sealing, is the best product of choice for the majority of breeding specialized households the economic wealth., Feed machine equipment, structure and working principle:The feed machine chassis welded high-quality materials, the feed inlet in the grinder at the top, can be matched with the various forms of feeding structure, the hammer is arranged symmetrically; feed machine work the material into the crushing chamber, rotating at high speed hammer blow and sieve friction, the material gradually be crushed, and the effect of centrifugal force and air through the bottom of the discharge from the mouth., Feed machine equipment use and safety precautions:1, in order to avoid unexpected machine in the transport, handling and other aspects of various parts of the bolts must be checked prior to use, the nut is loose, flat teeth, scalloped, the spindle nut without loosening. Rotate the pulley, check the machine, whether the collision phenomenon.Rotating machine is flexible, inside the debris, boot idling to three minutes, no anomalies in order to start operating.3, must pay attention to clear the debris material is strictly prohibited iron stone and other objects into the machine, so as not to damage the machine wounding.4 splice Toi should more than 4 meters length, 0.6 meters in diameter, the fabric can not be too close, use the material to ensure that the cloth bags have sufficient permeability.5, the feed should be uniform, pay attention to the power level of the load free to choke. Crushed particles is available when pumping plate feed rate regulator section.Hammer: When the corner of the wear and tear affect efficiency, can be the opposite of hammer U-turn (U-turn once with the tune, so as not to cause rotor imbalance) the replacement of the hammer to replace them all.7, a day before starting should bear the butter, 500 hours should check the bearing condition. The installation screen films burr side should be installed in the above. According to the fineness of the crushed materials, select a different diameter mesh sieve.Fourth, the main technical parameters(powder blender)Mixing coefficient of variation: LV> = 8%Unit work area noise:> = 85db orUnit work area dust:> = 10mg / -Finished type: dry mixed feedOperator 1-2powder blender for industrial.
This contents  for reference only, business please go to the official network http://mill.com.tw

Special putty powder blender

High-speed powder blender &The choice of powder blend

High-speed powder blender

◆ silty variety of raw materials in a short period of time, an instant high-speed mixed, show uniform color capability.
◆ mixture and stir-wing slot to adopt all of SUS304 stainless steel, can also be the installation of heating and cooling.
◆ Exhibition powder mixed color, fully enclosed, auto-injector operation.
◆ low to high-speed mixing, to shorten the process, show a more even color bright.
◆ the whole machine to use SUS 304 stainless steel, aluminum, high-carbon steel and engineering plastics to create.
◆ Bucket AS can be expected to tilt down

The choice of powder blender

The ideal powder blender should have the following characteristics(Fischer 1960):

(a)efficient mixing action-to give satisfactory blending in the minimum time,

(b)gentle mixing action-to reduce mechanical fragmentation or agglomeration to a minimum,

(c)dust-free operation-the machine should preferably be sealed,

(d)easily cleanable-surfaces should be smooth, readily accessible and free from obstructions and crevices,

(e)complete discharge-minimum of product retained in the machine,

(f)low costings-installation, running, maintenance and power usage costs must be minimal.

The choice of powder blender may be determined by the need for batch or continuous operation, single or multiple processing, and the degree of precision blending required. Sometimes the choice is a compromise but most authorities agree that for simple powder mixing the tumbler-type blender is more effective than the blade or paddle-type as it can produce the maximum product mobility with the minimum of scraping or frictional action

A Special Ribbon Mixer

We are manufacturing ribbon blenders which are designed for efficient and homogeneous mixing of different ingredients and formulations. In this ribbon blender, curved horizontal ribbon blades lift and tumble material while conveying to the centre of the mixer drum where they are continuously overlapped and cross blended. In this Ribbon blender, material goes through upward and downward movements and also there is a cross blending action. The material is thus mixed thoroughly and homogeneously.

These ribbon blenders are extremely useful in chemical industries, ayurvedic formulation (Duheri churna and Trifala churna), pharmaceutical industries, pesticides and fertilizer and food processing industries and other industries. These are manufactured in a range of 25Kg to 10OOKg batch capacity in M.S. and S.S.

Following are some its salient features:

• Due to the unique design of the ribbon blender the time required for mixing is shortened.

• There is no dust formation while mixing

• The quality of Raw Material and the provision of efficient gear box results in lesser maintenance cost and much less service after sales.

What is a ribbon mixer

Ribbon mixers are a basic industrial mixing tool. They consist, basically, of a trough-shaped casing (usually 2 to 3 times longer than it is wide) with a semicircular bottom, fitted with a horizontal longitudinal shaft on which are mounted arms supporting a combination of ribbon blades, paddles or helical screws set at a fairly close clearance to the semicircular mixer body so that no layer of material remains on the bottom of the mixer. The most effective design of ribbon layout is the double spiral in which the outer ribbon moves the product in one direction and the inner ribbon moves it in the opposite direction. This creates axial flow and prevents any buildup of material moved by the blades as they rotate is relatively small so that mixing times can be long. The capacity of the mixer should not be exceeded otherwise the ribbon and/or blades are not effective and the surface layers of the powder do not get adequately mixed.

Ribbon mixers are normally operated at room temperature but they may be jacketed for steam heating (at atmospheric pressure)or water cooling, should this be called for .Although ribbon mixers are relatively standard in design there are many modifications and commercial design options available depending on:(a)materials characteristics;(b)production requirements, particularly batch size and working conditions; (c)machine characteristic such as loading and unloading facilities.

Powder blender for industrial.
This contents  for reference only, business please go to the official network http://mill.com.tw

High-speed powder blender &The choice of powder blender 

The clasification of powder blender

Turbula Powder Blender

The Turbula Powder Blender is used in many exacting powder blending and mixing applications. These include:
Blending extremely heavy powders with very light ones
Mixing very small quantities of powders into larger volumes
Gently blending fragile granules without crumbling
Successfully mixing particles of different diameter
The Turbula Powder Blender has the following design features:

1.Powder mixing is performed in a closed container which ensures that even toxic materials can be blended successfully
2.The closed container ensures that the powder blending is dust free
3.The T2F and T10B use a unique clamping system that allows containers of any size or shape to be used
4.The Turbula ensures "No cross-contamination" and "No clean-up" after blending.
5.The Turbula has a tremendous track record - Over 15,000 Turbula Shaker-Mixers sold worldwide since 1950!
Dry Primer Powder Blender
Dry Primer Powder Blender: Tends equipment that blends and screens dry explosive powders in cloth, cone-shaped mixing and screening device to make primer powder for center-fire cartridges: Selects and carries predetermined quantities of ingredients from storage magazines and dryhouse to mixing house. Positions containers in specified order on dumping shelf of mixing device. Moves dump arm by remote control from behind cement wall to empty containers in mixing bag. Turns mixing crank specified number of times to move bag center up and down to blend powders, observing operations in mirrors set at angles. Pours blended powder into rubber containers, marks with identifying data, and carries them to storage magazines. Washes equipment and premises to prevent accumulation of explosive dust. Mends and replaces torn mixing bags, using needle and thread. Repairs screens and attaches bags to wall of mixing cylinder, using special lacing and tying technique. May also blend wet mixtures.
Cycone powder blender
the Cycone powder blender—a vertical conical screw blender that can handle all types of food powders. A spray nozzle that rotates with the mixing screw allows the user to inject liquid ingredients into the batch. The Cycone powder blender is available with or without a cooling/heating jacket. For intense mixing, a sidewall-mounted lump breaker can be incorporated. The product outlet is through the bottom via various discharge outlet designs.
Laboratory Powder Blender

The laboratory size Tumbler Mixer also uses inversion kinematics for mixing solids and liquids, which allows for intensive, fast and very gentle mixing without segregation.
This three-dimensional motion (Paul Schatz principle) combines a figure-of-eight movement with rotation, causing the substances to move in a rhythmic, pulsating motion.
The Inversina technique is much more reliable than those used for barrel mixers, v-blenders, double cone blenders or ribbon mixers, which have segregation zones and longer mixing and cleaning times.
The Features Of Inversina Powder Blender

1.The mixing basket can hold any type and size of container
2.Container is held in place with twisted rubber rings
3.Two independently driven axles: unlike the Turbula® mixer, there is no mechanical transmission therefore less servicing is required
4.Continuous rpm adjustment - no need for an expensive frequency converter
5.Quiet drive
6.Easy to clean
7.Security: automatic shut-off upon opening of the hood
Wet Primer Powder Blender
Wet Primer Powder Blender: Controls mixing kettles to blend explosive ingredients and produce wet priming mixture used in rim-fire cartridges: Carries prescribed quantities of dry powder, ground glass, liquid gum, and other ingredients from storage house to control house. Measures and mixes specified amounts of ingredients in rubber basin, using rubber spatula. Carries initial mixture to isolated mixing house and scoops it into mixing machine. Returns to control house and starts mixer, using switch on control panel. Stops mixer at designated intervals to add ingredients and to examine mixture to detect degree of dryness, adding water as required to prevent ignition of mixture during blending. Scoops blended mixture into rubber containers (boats), marks boats with identifying data, and carries them to storage house. Washes equipment and premises to prevent accumulation of explosive material. May also prepare ingredients for blending.
Tracer Powder Blender
Tracer Powder Blender: Tends machines and equipment that prepare and blend dry and liquid chemicals to produce flammable mixtures of specified composition for igniter, subigniter, and tracer powders used in tracer bullets: Weighs and measures amounts of ingredients in pounds, ounces, and drams, according to chart, using bench scale and beakers. Tends remote-controlled tumbling barrels to blend chemicals, adding ingredients in designated sequence at timed intervals, steam-heated oven to dry ingredients, and remote-controlled ball mill to pulverize dried ingredients, adding required number of rubber balls to achieve prescribed degree of pulverization. Sifts powder through silk screen by hand. Pours finished mixes into rubber pouches, marks with identifying data, and carries them to storage magazines. Brushes, washes, and hoses equipment and premises to prevent dangerous accumulation of powder.
Vertical Powder Blender
Vertical Powder Blender integrated polishing inside and outside of blender barrel, connected and fitted with motor beneath. There are 8 blades inside, when turning, the blades will generate a turbulent mix in all directions.
The vertical type mixers machines are major for blending raw material of plastic & rubber, and etc.
Features Of Vertical Powder Blender:
Internal and external mixing barrel are polishing and static free without holes. It won't be left and attached to the surface. Material is removed fast and cleaning is fast.

Mixing is conducted by eight blades with equal power for fast and even mixing.
The electric cabinet is controlled by a timer. A safety switch is installed unto the upper lid for mixing duration. (Pilot lamps, motor and safety switch equipped.)
Powder blender for industrial.
This contents  for reference only, business please go to the official network http://mill.com.tw
The clasification of powder blender

I want to know the principle of the grinding machine(Powder blender) magnetic switch

I want to know the principle of the grinding machine(Powder blender) magnetic switch

The magnetic seat is not a permanent magnet?

How to control so that he can choose the magnetic (can suck matter)

(Can pick up the material or non-magnetic)
There are two of the magnetic disk grinder

A mechanical-type permanent magnet magnetic disk

Another is the electromagnetic magnetic disk(Powder blender)

What you ask is mechanical permanent magnet magnetic disk

You can see the mechanical permanent magnet magnetic disk magnetic surface is composed of a steel one copper interval

Steel bars can be magnetic, copper strips to resistive magnetic (isolation of a steel bar)

Within the magnetic disk with a movable device

This device is equipped with rows spaced in accordance with NS pole permanent magnet arranged NS partitions size and the magnetic disk surface of steel bars and copper mesh size

Staff to use the wrench to switch sucked work is the move of the relative position of the device relative to the upper plate

Powder blender for industrial.
This contents  for reference only, business please go to the official network http://mill.com.tw

I want to know the principle of the grinding machine(Powder blender) magnetic switch